Mr.Taya, the first F3C Helicopter World Champion, designed this helicopter to be the highest quality model helicopter in the RC hobby industry for modelers who love building and flying model helicopters

Specification:

• Full Length of fuselage: 1410mm (55.50")
• Full width of fuselage: 190mm (7.50")
• Total height: 465mm (18.25")
• Main rotor dia: 1640mm (64.75")
• Tail rotor dia: 260mm (10.25")
• Gear ratio: 1:8.45:4.65
• Full equipped weight: 4800g (10.5 lbs)

All the features that made "Raptor" a household word in the R/C helicopter world are incorporated in the 90 size version. Any pilot can really appreciate the pleasure of flying in 3-dimensional space. Its docile handling is ideally suited for begginers.The stable hover and agility also make it the top choice for contest fliers and extreme 3-D pilots.

Thunder Tiger has incorporated all the state-of-the-art technology into designing and making this helicopter. Which includes a Unique Sideframe System, Bell-Hiller Mixing Control Unit and a Shaft Drive Tail Rotor which has the same aluminum torque tube system as the Thunder Tiger/Taya Imperio helicopter. Using a modern Computer Aided Design to design and manufacture the Raptor 90. High Performance Thunder Tiger PRO-90H ring engine and muffler are recommended.

Features

• Heavy duty collective pitch arm
• Anodized gunmetal side frames, boom supports, and skids
• Extended fan shroud increases cooling effectiveness, and
• strengthens the forward side frame stiffness at the same time
• Carbon base plate strengthens frame assembly
• Elongated radio tray enables proper CG with Li-poly battery types
• Heavy-duty collective pitch arm
• Metal washout base for smooth solid collective inputs
• Aluminum swash plate for enhanced control response
• Heavy-duty metal alloy spring steel clutch with larger diameter
• Cyclic ratio adjustment for smooth F3C or Extreme 3-D
• Included 11 and 12 tooth pinion gears
• Elevator control arm enhanced to eliminate flex
• Longer tail boom for use with Thunder Tiger 710mm blades
• Extended tail drive shaft with ends pre-drilled for easy pinning
• Dual bearings used to support tail drive shaft
• Aluminum tail pitch slider
• Header tank included for consistent engine runs
• Main tank holds 550cc of fuel
• Colorful decal scheme that is easy to see
• both on the ground and in the air

Accessories Needed

• Radio Set - Transmitter (6 or more channels), High Speed/Torque Servo x5, Receiver, Battery,
  Switch Harness, Gyro.
• Engine - Heli engine (90 size), Glow Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter,
  12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm Hex (starting tool), Remote Glow Plug Extension Glow Plug Wrench, Foam, Rubber Band.