|
The Raptor 50 Titan combines all the key features needed for Extreme
3D flight. Whatever the maneuver we are sure you will feel the performance
that the Titanium provides.
Specification:
- Full Length of fuselage: 1220mm (48.03")
- Full width of fuselage: 1400mm (5.51")
- Total height: 400mm (15.74")
- Main rotor dia: 1345mm (52.95")
- Tail rotor dia: 236mm (9.29")
- Gear ratio: (STD) : 1:8.5:4.56 / (OP) : 1:8.73:4.56
- Full equipped weight: 3000g (6.6 lbs)
This model was designed and engineered by the World-renowned Mr.Shigetada
Taya. It combines elements of his previously successful designs
with today's advanced technologies. Combined with all the features
of Raptor 50 V2, the new Raptor 50 Titan adds more new features—longer
tail boom to fit 620mm blade, push-pull system for collective pitch
control & elevator control, rear mounted tail rotor servo plate,
harden main shaft and more.
With all the new features included, the Raptor 50 Titan is the
best power-to-weight ratio and accuracy control system of any 50
class helicopter in the market. For 3-D pilots, Raptor 50 Titan
will make you enjoy executing crisp maneuvers like – Climbing
Tic-Toc, Chaos, Death Spirals and any other radical maneuver that
pilots can dream of. Beginners and advanced 3-D pilots will be impressed
with this new Raptor, The Raptor 50 Titanium.
Features
- Longer tail boom
- Rear mount tail rotor servo plate
- Push-Pull collective pitch control system
- Push-Pull elevator control system
- Stainless steel flybar rod
- All stainless linkage rods
- Harden main shaft
- Body support post
- Heavy-duty clutch bell (larger size bearing)
- New decals
Accessories Needed
- Radio Set - Transmitter (6 or more channels), Servo x5, Receiver,
Battery, Switch Harness,
Gyro, Foam, Rubber Band.
- Engine - Heli engine (.50~.53 size) for TTR4853-K10 (kit), Glow
Plug, Glow Fuel (15% - 30%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Extended 6mm
Hex (starting tool), Remote Glow Plug Extension Glow Plug Wrench.Foam,
Rubber Band.
|